Idiomas disponibles
Idiomas disponibles
Basic Use
Pairing Process
For the Miracle-EarLINK
with your hearing aid(s), you must first pair the
Miracle-EarLINK
™
Remote AV with each hearing
aid. You only need to pair one time, as they should
automatically recognize each other when both are
powered on and within wireless operating range.
You can pair the Miracle-EarLINK
single hearing aid or a set of hearing aids.
To start using the Miracle-EarLINK
1. Move lower switch from Lock
(right) to Unlock (left) position.
2. Power off, then power on your hearing aid(s), and
place within 12 inches of the Miracle-EarLINK
Remote AV.
Note: For a CROS hearing aid system, power
off both your hearing aid and CROS transmitter.
Power on only your hearing aid, ensuring the
CROS transmitter remains powered off.
3. Press and hold the HOME button
for 5 seconds.
4. After 5 seconds, both LEDs start
rapidly blinking.
4
™
Remote AV to interact
™
Remote AV with a
™
Remote AV:
5. For a set of hearing aids:
• If the left LED becomes solid blue for 2+
seconds and the right LED becomes solid
red for 2+ seconds, then the pairing was
successful. Otherwise, repeat steps 2 – 5.
For a single left hearing aid:
• If the left LED becomes solid blue for 2
seconds, then the pairing was successful.
Otherwise, repeat steps 2 – 5.
For a single right hearing aid:
• If the right LED becomes solid red for 2
seconds, then the pairing was successful.
Otherwise, repeat steps 2 – 5.
™
6. To verify your setup, pressing
the Volume Up or Volume
Down button should cause a
hearing aid volume adjustment.
Basic Use
5
