Idiomas disponibles
Idiomas disponibles
INSTALLING & CLEANING REUSABLE
1
INSTALLING REUSABLE CLOTH FILTER
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Remove the power head and place in upside-down position.
3. Install reusable cloth filter down over the filter cage making sure the cage is completely covered
(Fig. 2 & 3).
4. Place the power head back onto the collection tank.
REMOVING & CLEANING REUSABLE CLOTH FILTER
1. With the removed power head in an upside-down position, carefully remove the reusable cloth
filter from the filter cage (Fig. 4).
2. Clean the reusable cloth filter by gently tapping or brushing dirt off. Cleaning should not be
done indoors in living areas. For optimal performance, a new filter is recommended.
3. Use a mild soap and water solution to wash reusable cloth filter and rinse with clean water
(Fig. 5).
4. Allow the wet filter to air dry for 24 hours before installing onto the filter cage.
INSTALLING & CLEANING
1
INSTALLING FOAM WET FILTER
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Remove the power head and place in an upside-down position. Follow instructions to remove
the reusable cloth filter on page 12.
3. Carefully slide foam wet filter down over the filter cage making sure the cage is completely
covered (Fig. 2 & 3).
4. Place the power head onto the collection tank.
CLEANING FOAM WET FILTER
1. With the removed power head in an upside-down position, carefully remove the foam wet filter
(Fig. 4).
2. Use a mild soap and water solution to wash the foam wet filter and rinse with clean water (Fig. 5).
3. Allow the wet filter to air dry for 24 hours before installing onto the filter cage.
CLOTH FILTER
2
FOAM WET FILTER
2
3
3
4
4
12
5
5
