Idiomas disponibles
Idiomas disponibles
GENERAL USE AND SAFETY WARNINGS
While using this device, several basic safety
precautions must always be followed in order to
reduce the risk of fire, electric shocks and personal
injuries.
Read and understand the manual before start
using this equipment. Save this manual for future
reference.
General
These preventive measures are essential for your
safety. Always use this equipment with care in a
responsible manner having in consideration that its user
is responsible for eventual accidents caused to third
parties or their goods.
Make sure that all individuals using this equipment have
had the necessary training and have read and fully
understand these operating instructions. Before
operating it for the first time, its user must be instructed
by the vendor or a competent person about its
functionalities.
This instruction manual is an integral part of the
equipment and must always be provided.
Never allow this equipment to be used by children,
people with limited physical, sensorial or mental
capabilities, with lack of experience and knowledge and
who is not familiar with the instructions.
This device must only be operated as described in
this instruction manual. No other use is allowed
besides the described.
For safety reasons, any changes other than the
assembly
of
accessories
manufacturer are prohibited. Any changes made void
the warranty.
Electrical safety
Do not use the charger in an explosive
environment, especially in the presence of
flammable liquids, gases or dusts. Any power tool may
form sparks that might ignite liquids, gases, or dust.
The supply voltage must match the equipment's
technical specifications. Keep voltage between +-
5% of nominal value. Do not use the equipment where
the power supply isn't stable. The power cable must be
plugged into an electrical socket with a differential
protection and earth connection.
authorized
by
the
If the working area is extremely hot, damp or with high
dust concentration, the power socket circuit must be
protected with a circuit breaker (30mA), to ensure the
user's safety.
Do not expose the charger to rain or use them in wet or
damp environments. The presence of water in an
electric tool increases the risk of damage and electric
shock to the user.
Never use the power cable to pull, carry or unplug the
tool. Damaged power cables increase the risk of electric
shock.
Keep the power cable and plug away from heat sources,
oil, sharp objects and the rotating accessory. If the
power cable is damaged, it must be replaced by a
qualified technician; it is not allowed to repair it.
Do not modify the power cable plug. Use a compatible
socket with the plug of this equipment. Do not use any
type of adapter.
The use of extension cords to connect the power cable
is not recommended. However, if you use an extension,
you should take some precautions, such as:
▪
If using this device outdoors, use only suitable
extension cords for outdoor use. Using a proper
extension cord reduces de risk of electric shock;
▪
Only use extension cords, plugs and sockets with
earth connections
▪
The extension cable section must be proportional
to the length and have equal or higher
characteristics to the charger power cord;
▪
Do not use damaged extension cords. Check them
before using and replace if necessary;
▪
Always unplug the extension cord before
removing the charger power cable;
▪
When it's an extension cord reel, unroll the entire
cable;
Before operating
Make sure that the charger is only used by who is
familiar with the instruction manual.
Always check the charger before using it. If the charger
does show damages do not plug it in the socket. This
may cause an electric shock to the user.
If the terminals are dirty, clean them with a dry and
clean cloth.
15
