CAUTION!
digits!
3.3.3 OPENING THE SAFE USING THE ENCRYPTION CODE
a) Using the lock's pushbutton panel, enter the encryption code and confirm with
"A" or "B".
The
Within 5 seconds unlock the door by turning the knob and pulling it towards you.
3.3.4 BATTERY REPLACEMENT
a) If the green and red indicator lights are simultaneously lit when the safe is in use,
the batteries are about to run out and must be replaced.
CAUTION!
combination is confirmed by flashing the yellow indicator light and a short beep.
CAUTION!
constantly flashing yellow indicator light with a beep, this means that the
entered
To change the combination you must repeat all steps of programming the
combination!
CAUTION!
temporarily locked for 20 seconds (the combination cannot be re-entered)! In
case of three consecutive attempts to enter the wrong combination the
temporary lockout will be extended up to 5 minutes! After waiting the specified
time you will be able to make another attempt to enter the code.
CAUTION!
the safe can be opened with additional emergency keys!
3.4. Cleaning and maintenance
a)
Use only non-corrosive cleaning agents for cleaning the surfaces.
b)
Store the unit in a dry and cool place protected from moisture and direct
sunlight.
The correct combination of encryption contains from 3 to 8
green
indicator
When entering the combination code, each digit of the
If, after entering the code, the control panel displays a
combination
After entering the wrong combination three times the lock is
In case the code is missing or the power supply is exhausted,
light
will
is
illuminate.
incorrect!