Idiomas disponibles
Idiomas disponibles
Cutout instructions
The burners are equipped with a lip around the top of the fireplace. When the burner is installed in your fireplace this
lip is used to keep the burner in place and not fall through the cutout.
The cutout dimensions you need to make in the bottom of your surround needs to be larger than the cutout
dimensions - but smaller than the lip size.
For the burner to sit completely flush with the bottom of the fireplace you can choose to mill out a small recess
matching the size of the lip.
Instruction for building in a bioethanol burner
•
The recess and surroundings should be made of a fire-resistant material.
•
Keep a safety distance of 1000mm (1 meter) to flammable materials around the flame.
•
Keep an open space above the burner of minimum 400 mm – recommended 500 mm (Size A in the illustra-
tions).
•
If a television is placed directly above the burner, please follow the instructions in the following illustrations.
•
Always ask your TV supplier whether your TV is suitable for hanging above a fireplace.
TV installation option 1
Installation of the bioethanol
burner underneath a TV with a
small shelf to protect the TV
from any direct heat.
C
B
A
A
Minimum
400 mm
Recommended
500 mm
0-50 mm
Min 1110 mm
51-100 mm
Min 1000 mm
C
≥101mm
Min 900 mm
How to use the table
"If B is x, then C should be"
B
5
