cecotec ENERGYSILENCE 2000 COOL TOWER SMART Manual De Instrucciones página 40

ENGLISH
4. OPERATION
Fig. 4
1. Power button
2. Speed control button
3. Mode button
4. Oscillation button
5. Timer button
6. Cool Mode button
Fig. 5
1. Power button
2. Speed control button
3. Mode button
4. Oscillation button
5. Timer button
6. Cool Mode button
7. Display
8. Low speed indicator
9. Medium speed indicator
10. High speed indicator
11. Normal mode indicator
12. Natura mode indicator
13. Night mode indicator
Filling the water tank
- Remove the water tank, to do so, loosen the screw on the water tank and turn the tab.
- Fill the water tank with natural and cold water. Make sure the water level is between the
marks 'Min' and 'Max'.
- To increase the cooling effect, insert the ice bucket with ice cubes into the water tank.
- Close the water tank.
- Warnings:
- Make sure that the product is unplugged from the power supply before refilling the water
tank.
- Fill the water tank with water. Do not use chemical products, oils or other additives.
- Fill the water tank only with cold water (previously boiled).
- Make sure the water level is between the 'Min' and 'Max' marks.
- Place the device on a stable surface and connect it to the mains. The indicator light
indicates that the device is in standby mode. Press the power button and the appliance will
start operating at medium speed by default. Press once more and the device will enter the
Standby mode.
E N E R GYS I L E N C E 2000 COOL TOWER SMART
40