VENTE-UNIQUE BROILY Manual De Usuario página 25

Make sure that all control knobs on the plancha are turned off.
Connect the gas cylinder directly to the plancha.
Open the gas bottle control valve or regulator valve.
Make sure there is no gas leakage by adding a mixture of soap and water with equal
portions (half soap, half water) to all the connection points on your gas system, including
the connections to the gas valve and the taps on the gas pipe (see diagram below).
NEVER USE A NAKED FLAME to find the leak position.
The formation of bubbles on the tested areas means there is a leak. Turn off the gas
supply and seal all connections tightly. Repeat the test. If you still see the bubbles, do
not use this plancha. Request help from your local retailer.
Carry out this leak test at least once a year and every time you remove or replace the
gas bottle.
Make sure that the valve is positioned correctly above the diffuser.
You will also have to carry out this test whenever you smell characteristic odors of gas.
Before proceeding, check that you understand all the following SAFETY
RECOMMENDATIONS.
Before cooking for the first time, preheat the plancha on "HIGH" for 10 minutes until the
smoke has dissipated. This process must be carried before cooking. IMPORTANT: If
the plancha has a lid / cover, open it during pre-heating.
5. USE AND MAINTENANCE
24