Imit SILVER CR S Manual Del Usuario página 16

ROOM THERMOSTAT WIRING DIAGRAM
HEATING/COOLING UNIT
Warning!
Operations within the heating / cooling unit or the electrical installation must be carried
out by professionally qualified persons.
ROOM THERMOSTAT TEMPERATURE CALIBRATION
Temperature sensors which are used in Room Thermostats are highly sensitive. You
may need to calibrate your Room Thermostat if you would like to get the same
temperature values with other thermometers in your living space.
While your device is turned off, press and hold the "On/Off" button for 3 seconds.
Press the "On/Off" button until the "CAL" menu appears. In order to see the desired
temperature, set the temperature difference by pressing the "Temperature Adjustment
Buttons". This value can be arranged between "-8° C" and "+8° C".
In order to save the settings and exit, press the "On/Off" button until the device turns off.
Note: Recommended temperature calibration is "0.0°C".
FACTORY SETTINGS RESET
You can reset your Room Thermostat to its default factory settings. This operation
resets the mode temperature values, calibration setting and heating/cooling modes to
factory setting. In order to reset your Room Thermostat to factory setting:
While your device is turned off, press and hold the "On/Off" button for 3 seconds.
Press the "On/Off" button until the "RST" menu appears.
While in the "RST" menu, select the "YS" option by using the "Up" or "Down" buttons and
press the "On/Off" button.
Your device will be turned off and reset to factory settings.
KEY LOCK
In the Room Thermostat there is a key lock function to avoid any unintended contact.
In order to unlock the Room Thermostat's key lock the "On/Off" button should be
pressed for 3 seconds. If buttons on Room Thermostat are not touched for 10 seconds,
key lock will be reactivated.