Troubleshooting
PROBLEM
1.There is no water in the
2.The water hasn't been
pumped out yet.
No water comes
out when making
coffee.
3.The machine is not
The steam outlet hole is
No steam comes
out.
The machine
does not work.
The hot water and
steam button
The steam switch is not off.
lights are on and
the other two
lights are not on.
1.You used skimmed
The milk does not
foam well.
2.The machine was not
Coffee powder was either
There is coffee
too fine or you added too
dripping out of
much powder.
funnel or filter.
If the problem persists, do not try to repair the appliance by yourself. Please contact a
13
CAUSE
SOLUTION
1.Fill the tank with water and
water tank.
turn on the power switch and
the coffee switch.
2.Pump the water: press the
coffee button and turn on the
steam knob. When there is
water coming out, then follow
the instructions to make coffee.
3.The machine needs to be
preheated.
preheated before coffee can be
made. This is when the
indicator light stops flashing
and remains light up.
1.Use a small wire through
the steam hole.
2.Clean the steam pipe with
blocked.
hot water after foaming.
Turn the steam switch to OFF.
1.Use whole milk.
2.Steam can only be started
after the steam indicator light
milk.
changes from flashing to
constant light.
preheated.
Use the correct type of ground
powder. Do not use more than
3 tablespoons of coffee.
certified service centre.
Notes
14