Idiomas disponibles
Idiomas disponibles
10. Con el soporte del pie correspondiente, insertamos 1 tornillo de la medida
8. Position remaining parts C & D as
M10 x 140 mm en las direcciones indicadas en la imagen y coloque la arandela y
la tuerca en el otro lado (parte externa), tal y como se muestra en la imagen
(Advertencia: No se ha de apretar al máximo).
11. Recordatorio de la posición de los
pies tanto de un extremo cómo del otro
10. Insert bolt (I) in the direction indicated
extremo de la escalera de braquiación.
and place a washer and nut on the other
12. Position part E as shown.
n one of part G as shown.
Para su correcta colocación seguir el
sides as indicated. (note: DO NOT fully
paso 10, nuevamente.
C
G
H
F
. Position remaining parts C & D as
shown. Repeat steps 4-6.
13. Inserte 2 tornillos de las medidas M8 X 100 mm en las direcciones previamente
ndicated
indicadas en la imagen y coloque la arandela y la tuerca en el otro lado (parte
the other
11. Position remaining part G And both
externa), tal y como se muestra en la imagen (Advertencia: No se ha de apretar al
2 bolts (J) in the direction
NOT fully
parts H as shown. Repeat step 10.
máximo).
nd place a washer and nut on
14. Position remaining part E And both parts
sides as indicated. (note: DO
NOT fully tighten)
12. Position part E as shown.
C
9. Position one of part G as shown.
shown. Repeat steps 4-6.
8. Position remaining parts C & D as
shown. Repeat steps 4-6.
D
8. Position remaining parts C & D as
12. Les mostramos en la imagen cómo
shown. Repeat steps 4-6.
deberían quedar montados los soportes
13. Insert 2 bolts (J) in the direction
12. Position part E as shown.
inferiores en forma de triángulo. En el
indicated and place a washer and nut on
paso 13 les indicaremos como realizarlo
correctamente.
tighten)
H
E
F
10. Insert bolt (I) in the direction indicated
9. Position one of part G as shown.
12. Position part E as shown.
F as shown. Repeat step 13.
F
13. Insert 2 bolts (J) in the direction
indicated and place a washer and nut on
14. Position remaining part E And both parts
the other sides as indicated. (note: DO
14. Recordatorio de la posición de los
pies y la barra en diagonal situado
encima de los pies. Repetimos el paso
9. Position one of part G as shown.
13 para que ambos pies estén bien
sujetos; tal y como se muestra en la
imagen.
C
G
H
H
16. Una vez puestos todos los tornillos con sus respectivas arandelas y tuercas nos
9. Position one of part G as shown.
13. Insert 2 bolts (J) in the direction
disponemos a insertar los tapones para cubrir las tuercas y las arandelas; tal y como
indicated and place a washer and nut on
the other sides as indicated. (note: DO
se muestra en la imagen.
11. Position remaining part G And both
NOT fully tighten)
the other sides as indicated. (note: DO
parts H as shown. Repeat step 10.
NOT fully tighten)
and place a washer and nut on the other
16. ¡Disfrútalo!
sides as indicated. (note: DO NOT fully
tighten)
13. Insert 2 bolts (J) in the direction
indicated and place a washer and nut on
the other sides as indicated. (note: DO
15. Tighten all the bolts.
E
F
F as shown. Repeat step 13.
10. Insert bolt (I) in the direction indicated
and place a washer and nut on the other
sides as indicated. (note: DO NOT fully
10. Insert bolt (I) in the direction indicated
tighten)
and place a washer and nut on the other
sides as indicated. (note: DO NOT fully
tighten)
F
F
E
E
F
F
10. Insert bolt (I) in the direction indicated
and place a washer and nut on the other
sides as indicated. (note: DO NOT fully
14. Position remaining part E And both parts
F as shown. Repeat step 13.
14. Position remaining part E And both parts
F as shown. Repeat step 13.
G
H
H
F
11. Position remaining part G And both
16. Fully insert end caps to cover the nuts & washers.
parts H as shown. Repeat step 10.
14. Position remaining part E And both parts
NOT fully tighten)
15. Tighten all the bolts.
17. Done. Enjoy.
G
H
H
15. Apretamos todos los tornillos
11. Position remaining part G And both
parts H as shown. Repeat step 10.
acordes
a
las
indicaciones
previamente
dadas
para
cada
11. Position remaining part G And both
sujeción.
parts H as shown. Repeat step 10.
15. Tighten all the bolts.
tighten)
15. Tighten all the bolts.
E
F
F as shown. Repeat step 13.
H
11. Posit
par
1
