Idiomas disponibles
Idiomas disponibles
Instruction Manual
DAMPFBUGELEISEN
UT-KERAMIKTOP
Model: UT-KERAMIKTOP
Functions: Dry/Steam/Spray/Burst/Vertical Steam/
Self-Cleaning/anti-drip/anti-calc/auto-shut off
Rated parameter: AC220-240V，50/60Hz,2400W
SAFETY INSTRUCTIONS
1. Before using for the first time, please check if the
voltage rating on the type plate corresponds to the
mains voltage in your home.
2. Make sure to unplug the appliance from the socket
when leaving the iron even for a short while, and
stand the iron on its end. Please leave the iron away
from the touch of children..
3. The iron will be of high temperature when used,
never touch it with hand or close to the flammable
product in order to avoid the accident.
4. Caution: Unplug the appliance from the socket
before filling the iron with water.
5. Never immerse the iron in water or other liquid.
6. Please send the iron to our special repair agent for
repair if any damage on cord.
7. Deposit or Mineral in the water will lead to generate
the scales and block the seam hole, therefore it is
advisable to use distilled water.
8. Do not use chemically descaled water
9. The ejected steam is hot and therefore hazardous.
Never direct the steam towards people.
10. The iron must be used and rested on a stable
surface
11. When placing the iron on its stand, ensure that the
surface on which the stand is placed is stable.
12. Do not pull or carry by cord, use cord as a handle,
close a door on the cord, or pull cord around sharp
edges or corners, Keep cord away from heated
surfaces
13. The iron is not to be used if it has been dropped
,if there are visible signs of damage or if it is leaking
CAUTIONS OF THE FIRST USE::
1. The iron has been greased, and as a result, the iron
may slightly smoke when switched on for the first
time. After a short while, this will cease.
2. Before using for the fist time, remove any sticker
or protective foil from the soleplate. Clean the
soleplate with a soft cloth.
3. Keep the soleplate smooth: avoid hard contact
with metal objects.
COMPONENT NAME:
A- Sole plate
B- Spray Nozzle
C- Water tank
D- Water filling cover
E- Spray button
F- Burst button
G- Soft Handle
H- Cord protector
I- Back Cover
J- Indicator light
K- Self cleaning button
L- Steam button
M- Thermostat Dial
Filling with Water:
Make sure iron is unplugged and the thermostat dial
is in the MIN position. Place iron on the heel rest, tilt
forward approximately 45 angle and pour water into
the water-filling opening to the MAX position of the
water tank.
Vertical Steam:
" Burst of Steam" can also be applied when holding
the iron in vertical position, this is useful for removing
creases from hanging clothes, curtains, et.
Dry Ironing:
1. Set the steam selector to position O(=No Steam)
2.As per washing label of various clothes, set the
correct ironing temperature to begin a ironing.
Steam Ironing:
1. Fill water in the iron as per the water-filling
methods.
2. Plug the appliance in the socket.
