Idiomas disponibles
Idiomas disponibles
Welcome
Welcome to Sytech! Thank you for purchasing the new SY-TWS500 True Wireless
QMini Wireless Headphones. Please read this manual carefully before using the
product and pay close attention to the precautions mentioned below. Keep this manual
in a safe place for future reference.
Parts of QMini SY-TWS500
1: Opening cover lid
2: Battery capacity indicator LED display
3: Charging port. Lightning connector
4: Dust proof mesh
Warning
• Do not expose the QMini to dust, humidity, extreme temperatures or hard impacts.
• Do not use corrosive or abrasive cleaning products.
• Do not dismount the earphone. In case of any malfunction，contact Sytech technical service
department for a proper solution or repair.
• Make sure your QMini are off when not in use.
• Do not leave the battery discharged for a long period of time as this can damage the internal
battery.
• If you haven't used the headphones for more than a month, please charge them before
using them again.
• Do not use the unit if it has been dropped or damaged in any way.
• Do not use the earbuds at excessive volume levels, as damage to hearing may occur.
• Please retain all packaging after you have checked the content of the box.
• Keep your headphones away from Wi-Fi, routers or other high frequency transmission
equipment to avoid signal interruption.
• Make sure to use your earphones and your BT device within working range (10 meters).
• When charging the unit, make sure to use only certificated adaptors, if not, this may harm
the charging case and earbuds performance. To charge your QMini, it is important you use a
5V 1A charger. Do not use a fast charger which operates over 5A as this would damage the
charge case and the earphones.
5: Touch sensor area
6: Charging contact
7: Microphone
