Hendi 281376 Manual página 6

Grounding installation
This appliance is classified as protection class
I and must be connected to a protective ground.
Grounding reduces the risk of electric shock by
providing an escape wire for the electric current.
Utensils
There may be certain non-metalic utensils that are
not safe to use for microwaving. If in doubt, you can
test the utensil in question following the procedure
below.
Utensil Test:
Fill a microwave-safe container with 1 cup of cold
Preparations before first use
• Remove all packing material and accessories.
• Examine the micorwave for any damage such as
dents or broken door. Do not install if the micro-
wave is damaged.
• Remove any protective film found on the micro-
wave cabinet surface.
• Clean the inside of the microwave with lukewarm
water and a soft cloth.
• Clean the components.
EN
• Place the microwave on a level surface.
Operation
1) Power
2) Time Entry
3) Double quantity or triple quantity
4) Pause
5) Start
Power Up
When plug into the socket, --- will be shown on the
display. It will disappear in 1 minute of inactivity.
6
7) 1) 2) 3)
8)
This appliance is fitted with a power cord that has a
grounding wire and grounded plug. The plug must
be plugged into an outlet that is properly installed
and grounded.
water (250ml) along with the utensil in question.
Cook on maximum power for 1 minute. Carefully
feel the utensil. If the empty utensil is warm, do not
use it for microwave cooking. Do not exceed 1-min-
ute cooking time.
• Keep an open space of at least 10 cm around the
microwave and 30 cm from top to ensure proper
ventilation.
• Do not place anything on top of the microwave.
• Position the microwave so that the plug can al-
ways be reached.
• Place the oven as far away from radios and TV as
possible. Operation of microwave may cause inter-
ference to your radio or TV reception.
6)
6) Number Keyboard
7) Defrost
8) For USB operation
9) USB card
Then, this microwave will enter into the Idle Mode.
4) 5)
9)