Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TECHNICAL SPECIFICATIONS
Video input/output:............................................................................................................................Male BNC
UTP cable input/output: ...........................................................................................................Terminal board
Recommended wire type:.................................................................................24 AWG UTP CAT5 or higher
........................................................................... Impedance 100 Ω ± 20%, resistance DC loop 18 Ω/100 m
BNC impedance: .......................................................................................................................................75 Ω
UTP impedance:......................................................................................................................................100 Ω
Voltage surge protection:............................................................................................................................ Yes
Working temperature range:............................................................................................................... -10-45°C
Storage temperature range: ............................................................................................................... -30-60°C
Humidity:................................................................................................................................................. 0-95%
Dimensions (W x H x D): ....................................................................................................... 30 x 15 x 14 mm
Weight (each): ........................................................................................................................................... 30 g
Important note:
Technical features may be subject to change without prior notice.
APPLICATIONS
Refer to table 2 to select the active/passive transmitters and receivers to be used for system installation
according to the distance between source and user.
Application
Important note:
•
Table 2 shows the approximate maximum distances with a tolerance of approximately ± 50m.
•
The distances may vary according to the wire quality also when the latter is made by the same
manufacturer as the devices.
•
Consider that the distances may decrease if the devices are used with DVR apparatuses.
DS1092-035A
N. of cameras
A
1
B
1
C
4
D
16
Table 2: distances with 24 AWG UTP CAT5 cable
Camera distance
b/w - colour (m)
from
to
0
250
1092/300A
250
1200
1092/300A
250
1200
1092/300A
250
1200
1092/300A
VIDEO BALUN
TX
RX
Ref.
Ref.
1092/300A
Ref.
Ref.
1092/303
Ref.
Ref.
1092/304
Ref.
Ref.
1092/316
9
Tabla de contenido
