Idiomas disponibles
Idiomas disponibles
6. Wait while the app finds the device. Once it is added, tap on "Done".
Note:
1. If the device does not flash, restart by following the steps detailed in the app: with the
device off, turn on, turn off, turn on, turn off and turn on again and the light will flash. For
this process to work, do it in less than 10 seconds.
2. For a correct synchronization with the mobile phone, it is necessary to accept all the
accesses requested by the app.
3. To make the first connection, you must be connected to a WiFi network. Make sure that
the light flashes quickly and that the WiFi password you have entered is correct. The
connection process may take several minutes, please be patient.
4. After the first connection, you can use a new WiFi or mobile data to control the device at
any time and from any location.
5. Only compatible with 2.4 GHz WLAN, Android 4.1 and above and iOS 8.1 and above. Do
not use 5G WiFi.
6. The first connection should be made close to the router to ensure a faster connection.
7. When connecting multiple devices to the WiFi network, do not place them too close
together as this may cause signlal interference.
5. Control your device
• After successful configuration, the device will be displayed on the "Devices" page. Tap
on the device icon to control its operation.
• Navigate through the app menus to control your device.
Important: Make sure that the solar power button on the home screen is enabled, as this
is necessary for the spotlight to function properly and for the panel to capture solar
energy.
