Idiomas disponibles
Idiomas disponibles
Skimmer lip
recess
Back of
panel
wall
Apply gasket to front face of
4
extension throat.
Important Do not fit liner
clamp flange until water
level has reached the level
of the throat.
After liner is in place, feel
through liner for holes in
gasket / throat face and offer
clamp flange to throat
ensuring all 16 holes are
aligned. Using self-tapping
screws provided, secure
clamp flange to throat
through pool liner and
gasket.
Carefully cut liner material
from centre of throat
aperture. Finish using clip-on
cover plate.
Skimmer
front lip
Extension
throat
recess
Clamp flange
(SPC434S)
Skimmer
Clip-on cover
plate (SPC432)
Using a brush, apply ABS
3
cement to the front lip and
recess of the Certikin
skimmer and to the recess in
the back face of the
extension throat. Slot the
skimmer lip down into the
slot in the throat until firm.
(The two holes in the base of
the throat recess allow
excess cement to squeeze
out, ensuring an all-round
fit). Using the brush, smooth
off any other excess cement
and re-coat the joins of the
skimmer-throat inside and
out, filling any voids to
ensure a watertight seal.
1st Gasket
(SPC435SN)
Liner
Self-tapping
screw
(SPC405P)
Panel
Wall
4
