Assembly Instructions - Style selections SGY-GAR2 Manual De Instrucciones

ASSEMBLY INSTRUCTIONS

Assemble Decorative Metal Hose Cabinet
1. Open metal cabinet hose reel cover (A),
remove crank handle (C) and screw (D)
leader hose (B), four legs (E) and four leg
screws (F) from the separate box.
2. Hold lid closed with one hand, rotate unit
upside down and place on a piece of clean
cardboard or towel. Install 4 legs (E) and
screws (F) in bottom corner openings with
open sides of legs facing inward as shown.
NOTE
Make sure the hole in the leg is properly
aligned with the hole in cabinet before
tightening the screw down.
3. Turn the Metal Cabinet hose reel upright and
stand it on a level surface. Use a phillips
screwdriver install
screw (D).
crank handle (C) with
1
5 ft
2
3
5
A
E
F
C
F
E
B
D
D
C