Valance Installation; Hold-Down Brackets Installation - Levolor Real Wood Instalación

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

VALANCE INSTALLATION

Locate the valance clip location
indicators on the backside of the
valance that read "Clip Here."
Insert the clips into the groove on the
backside of the valance. Rotate so
that the end marked "TOP" arrow is
pointing up.
For returns, insert L-shaped return
clip into the groove on the backside
of the valance return. Align and
insert the other end of the L-shaped
return clip into the groove on the
backside of the valance.
Align the clips with the slots on
the bottom of the headrail and
clip into place.
HOLD-DOWN BRACKETS INSTALLATION (optional)
Ideal for doors, hold-down brackets
prevent blind from swaying.
Assemble as shown to each side
of bottom rail.
Home
Hold-down
Inside Mount
Return clip
"Top" or
(OM only)
arrow end
Return clip
(OM only)
pin
Outside Mount
Motorized Tilt Operation
INSTALLATION
Valance clip
Valance
Slots
Starter hole
13
Tabla de contenido
loading

Este manual también es adecuado para:

Faux wood

Tabla de contenido