Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
7. To turn the unit On and Off
To turn the unit ON: briefly press the On/Off
button (K).
To turn the unit OFF: press the On/Off button (K)
and hold for 2 seconds.
Standby mode: when the unit is on, briefly press
the On/Off button (K), the unit switches to standby
mode. When the unit is in standby mode the
display (A) will continue showing the time, but the
display brightness will dim after 30 seconds. Briefly
press the On/Off button (K) again to return to full
operating mode or press On/Off button (K) for about
2 seconds to turn off the unit.
NOTE:
• Entering standby mode is a simple way to mute
radio/speaker sounds.
• When in standby mode, the unit can still charge
device(s) connected to USB power ports.
• The unit will turn off automatically after 1 hour of
being in standby mode and no button pressed.
8. To Set the Volume
Use the '+' button (B) to increase or '–' button (C) to
decrease the volume.
Briefly press one of the volume buttons to increase/
decrease by one level. Press and hold one of the
volume buttons to continuously increase/decrease
the volume.
9. Selecting the Operating Mode
To select the operating mode, briefly press the
mode button (D) several times until the desired
mode is displayed.
The following operating modes are available:
– FM Radio reception.
– AM Radio reception.
– BT – Playback of audio connected via
Bluetooth®.
– AUX – Playback of audio connected via AUX
input port (S).
The modes switch in the following order FM→AM→BT→AUX.
The active operating mode is shown by means of the corresponding symbol on the display.
7a
K
7b
The unit is in standby mode
K
9
12
The unit is ON
87.50
MHz
FM
A
AM
A
87.50
MHz
FM
D
B
C
