plastic wrap and set the temperature lower.
To avoid contamination of food, please respect the following
•
instructions
Opening the door for long periods can cause a significant increase
•
of the temperature in the compartments of the appliance.
If the refrigerating appliance is left empty for long periods, switch
•
off, defrost, clean, dry, and leave the door open to prevent mold
developing within the appliance.
This electric cooler is intended for keeping juices, nutritional drinks,
•
soft drinks, snacks, water, beer, etc., cold and fresh, but not specify
only for alcoholic wine.
Do not store explosive substances such as aerosol cans with a
•
flammable propellant in this appliance.
Store raw meat and fish in suitable containers in the refrigerator, so
•
that it is not in contact with or drip onto other food
•
Clean regularly surfaces that can come in contact with food and
accessible drainage systems
•
Save these instructions
INSTALLATION INSTRUCTIONS
Before Using Your Refrigerator
Remove the exterior and interior packing.
•
Check that you have all of the following parts:
•
•
1 Shelf
•
1 Instruction manual
•
Clean the interior surface with lukewarm water using a soft cloth.
Installing Your Refrigerator
This appliance is designed to be free standing only, and should not
•
be partially or fully recessed (built-in).
Place your refrigerator on a floor that is strong enough to support
•
the refrigerator when it is fully loaded.
Allow 5 inches of space around the back and sides of the refrigerator,
•
which allows the proper air circulation to cool the heat sink.
•
Locate the refrigerator away from direct sunlight and sources of
heat (stoves, heaters, radiators, etc.). Direct sunlight may affect
the acrylic coating and heat sources may increase electrical
5