LG ST-43HT Manual Del Propietário página 4

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Mounting on a Table
1 Lift and tilt the monitor into its upright position
on a table.
• Leave a 10 cm (minimum) space from the wall
for proper ventilation.
2 Connect the power cord to a wall outlet.
• Do not apply foreign substances (oils,
lubricants, etc.) to the screw parts when
assembling the product. (Doing so may
damage the product.)
• If you install the monitor on a stand,
you need to take actions to prevent the
product from overturning. Otherwise, the
product may fall over, which may cause
injury.
• Do not use any unapproved items to
ensure the safety and product life span.
• Any damage or injuries caused by using
unapproved items are not covered by the
warranty.
• Make sure that the screws are inserted
correctly and fastened securely. (If they are
not fastened securely enough, the monitor
may tilt forward after being installed.) Do
not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
• Only use the authorised stand and wall
mounting bracket made specifically for LG
products.
-
Pursuant to Consumer Protection
Law, LG Electronics will not be
held responsible for any product
malfunction, material damage or
injury caused by using products not
authorised by LG Electronics.
4
10 cm
Securing the Monitor to a Wall
1 Insert and tighten the eye-bolts, or monitor
brackets and bolts on the back of the monitor.
• If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket and
the eye-bolts on the rear of the monitor.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope. Make sure to keep the rope
horizontal with the flat surface.
• Use a platform or cabinet that is strong and large
enough to support the monitor securely.
• Brackets, bolts and ropes are not provided. You
can obtain additional accessories from your local
dealer.
Specifications
ST-43HT
Model
Width x Depth x Height
(mm)
Weight (kg)
43HT3WJ
420 x 242.3 x 241.4
2.7
loading