Chapter 4 Web Interface
Web Port
Web Idle timeout
Allowed Remote
IP(IP1,IP2,...)
Telnet Port
NTP settings
NTP settings
Table 40
Field Name
NTP Enable
Option 42
Current Time
NTP Settings
Primary NTP Server
Secondary NTP Server
NTP synchronization
Set the port value which is used to login from Internet port and PC port, default is
80
Set the Web Idle timeout time. The webpage can be logged out after Web Idle
Timeout without any operation
Set the IP from which a user can login the device remotely
Set the port value which is used to telnet to the device
Description
Enable/Disable NTP
Enable/Disable DHCP option 42. This option specifies a list of the NTP servers
available to the client by IP address
Display current time
Setting the Time Zone
Primary NTP server's IP address or domain name
Options for NTP server's IP address or domain name
NTP synchronization cycle, cycle time can be 1 to 1440 minutes in any one, the
default setting is 60 minutes
FTA5102E2/FTA5101 User Manual
62
