Panacom PA-7851 Manual Del Usuario página 15

Idiomas disponibles

Idiomas disponibles

1. Press REDIAL key in idle mode to go to the redial list.
2. Press the Navigation key to select an entry.
3. Press MENU key to display SAVE NUMBER, then press OK key to
display ENTER NAME. Enter the name of the contact (maximum 12
characters) and then press OK key to save the entry, and return the
display to the redial list.
Delete a redial number
1. Press REDIAL key in idle mode to go to the redial list.
2. Press the Navigation key to select an entry and then press MENU key.
3. Press the Navigation key to select DELETE and then press OK key to select.
4. Press OK key again to confirm. A confirmation beep is played.
Delete the redial list
1. Press REDIAL key in idle mode to go to the redial list.
2. Press the MENU key.
3. Press the Navigation key to select DELETE ALL and then press OK
key to select.
4. Press OK key again to confirm. A confirmation beep is played.
Using the call log
To receive Caller ID you may need to contact your telephone service
provider, and they will inform you also of any charges for it.Caller ID
lets you see the phone numbers of your callers on the handset display,
before you answer and in your Call Log afterwards.The Call Log stores
the last 10 external calls, whether or not you answered the call, so you
can call them back later.
Only the most recent call is saved if there are repeat calls from the
same number. When the Call Log is full, the next new call will replace
the oldest entry.
If you've got a new call in the Call Log, the Caller Display icon will ap-
pear on the handset display.
If the received number is the same as one in your phonebook, the
name from the phonebook will display as well as the number.
If a call is from someone who withheld their number, the display will
show WITHHOLD ID.
If the call is from someone whose number is unavailable, or if you
have not subscribed to Caller ID but have set the date and time, the
display will show CALLING when it is received and UNAVAILABLE in
the Call Log.
access call log
Press CALL LOG(UP) key in idle mode and press Navigation key to
Pg. 15
loading