Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation,
turn power off and unplug unit before troubleshooting�
Motor Doesn't Start or Blade Assembly Doesn't Rotate�
• Check that the power pod is clean and there is no food blocking connection when placing
on containers.
• There is too much food in the container. Remove some ingredients to be below the
maximum liquid line and try blending again.
• The unit has overheated. Unplug and wait approximately 15 minutes before using again.
• Check that the plug is securely inserted into the electrical outlet or try another outlet.
Food is Unevenly Chopped�
Either there is too much food in the container, or the pieces are too big. Try cutting the
food into smaller pieces of even size and processing smaller amounts per batch.
Food is Chopped Too Fine or is Too Watery�
The food has been over processed. Use brief pulses or process for shorter time. Let the
Pro Extractor Blades® Assembly come to a complete stop between pulses.
You Cannot Achieve Snow From Solid Ice�
Do not use ice that has been sitting out or has started to melt. Be sure to use short pulses
in the beginning to break up large pieces.
REPLACEMENT PARTS
To order additional parts and accessories, visit ninjaaccessories.com or contact
Customer Service at 1-877-646-5288. So we may better assist you, please register your
product online at registeryourninja.com and have the product on hand when you call.
10 ninjakitchen.com
ONE (1) YEAR LIMITED WARRANTY
The One (1) Year Limited Warranty applies to purchases made from authorized retailers of
SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the
original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship
for a period of one (1) year from the date of purchase when it is used under normal
household conditions and maintained according to the requirements outlined in the
Owner's Guide, subject to the following conditions and exclusions:
What is covered by this warranty?
1.
The original unit and/or non-wearable parts deemed defective, in SharkNinja's sole
discretion, will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months
following the receipt date of the replacement unit or the remainder of the existing
warranty, whichever is later. SharkNinja reserves the right to replace the unit with one
of equal or greater value.
What is not covered by this warranty?
1.
Normal wear and tear of wearable parts (such as blending vessels, lids, blades,
blender bases, etc.), which require regular maintenance and/or replacement to ensure
the proper functioning of your unit, are not covered by this warranty. Replacement
parts are available for purchase at ninjaaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform required
maintenance (e.g., failure to keep the well of the motor base clear of food spills and
other debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects
include damages caused in the process of shipping, altering, or repairing the
SharkNinja product (or any of its parts) when the repair is performed by a repair
person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service
If your appliance fails to operate properly while in use under normal household conditions within
the warranty period, visit ninjakitchen.com/support for product care and maintenance self-help.
Our Customer Service Specialists are also available at 1-877-646-5288 to assist with product
support and warranty service options, including the possibility of upgrading to our VIP warranty
service options for select product categories. So we may better assist you, please register your
product online at registeryourninja.com and have the product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or
replacement. A fee of $20.95 (subject to change) will be charged when SharkNinja ships
the repaired or replacement unit.
How to initiate a warranty claim
You must call 1-877-646-5288 to initiate a warranty claim. You will need the receipt as proof
of purchase. We also ask that you register your product online at registeryourninja.com and
have the product on hand when you call, so we may better assist you. A Customer Service
Specialist will provide you with return and packing instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary
from state to state. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
ninjakitchen.com
11
