Idiomas disponibles
Idiomas disponibles
TPI ROOM THERMOSTAT HEATING MODE WORKING GRAPHIC
Cooling Mode
Your room thermostat takes the average room temperature of last 40 seconds as
basis. With the TPI algorithm in the product by creating a general temperature map of
your home, it learns how long it takes to reach the desired room temperature and how
this temperature is maintained. Thus, it ensures that the room temperature remains
within a certain range.
TPI ROOM THERMOSTAT COOLING MODE WORKING GRAPHIC
Your Room Thermostat sends the last status signal to the Receiver every 10 minutes.
Thus, your Room Thermostat and Receiver work synchronously. If the signal cannot
reach to the Receiver from the Room Thermostat for 22 minutes, it perceives that the
connection is broken and stops the heating/cooling operation for safety reasons.
Likewise, in cases where the electricity comes back after a power failure, the Receiver
do not operate the heating/cooling unit until 'operate' signal reaches from the Room
Thermostat.
However, in this case, if the Room Thermostat continues to operate normally, it will
continue to work properly without any need for intervention since it sends a status
signal to the Receiver every 10 minutes.
WHAT TO KNOW ABOUT TPI ROOM THERMOSTAT
If the placement of the TPI Room Thermostats is changed, the learning process will
restart.
If the TPI Room Thermostats are de-energized (battery replacement), the learning
process will restart. The learning process should be considered as 7 days.
