Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
SIDE 1
INSTALLATION INSTRUCTIONS FOR WALL PROTECTOR
DOOR STOP MODELS: BC41023 & BC41023.
1) Position and align stop between wall and door hardware
(knob, lever, pull, etc).
(Note: If knob or lever has push button locking be sure to
position stop so push button is not pushed when it hits the stop)
2) Holding stop in place, mark screw hole position through hole
in center of the rubber portion of the stop.
3) Drill 3/8" hole at mark to use plastic toggle anchor (included).
4) Insert plastic toggle into 3/8" hole and tap until ush with
wall.
5) Insert screw through hole in center of bumper and secure
stop to the wall.
©2023 Hampton Products International Corp., 50 Icon, Foothill Ranch, CA 92610-3000
Customer Support: 1-866-LOCK-PRO (1-866-562-5776) • www.brinkscommercial.com • 999-30036 REVA 02/23
Resumen de contenidos para BRINKS BC41023
- Página 1 SIDE 1 INSTALLATION INSTRUCTIONS FOR WALL PROTECTOR DOOR STOP MODELS: BC41023 & BC41023. 1) Position and align stop between wall and door hardware (knob, lever, pull, etc). (Note: If knob or lever has push button locking be sure to position stop so push button is not pushed when it hits the stop) 2) Holding stop in place, mark screw hole position through hole in center of the rubber portion of the stop.
- Página 2 SIDE 2 INSTRUCCIONES DE INSTALACIÓN PARA TOPE DE PUERTA DE PROTECTOR DE PARED MODELO: BC41023 y BC41023 1) Coloque y alinee el tope entre la pared y el herraje de la puerta (perilla, manija, etc.). (Nota: Si la perilla o la manija tienen un botón de bloqueo, veri que que el tope está...