endolite Elite Blade EB24L1 Instrucciones De Uso página 6

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

7 Cutting Shin to length
Note: the following instructions assume the use of the male, sliding, rotating pyramid supplied
with the elite blade. If an alternative adaptor is required, this should be taken into account
throughout the build process.
Use appropriate health and safety equipment at all times including extraction facilities
1
Cut the blade 10-15mm longer than required and
assemble fitting clamp (941255).
3
Tighten fitting clamp bolts to 15Nm
(check each screw at least twice).
5
Remove socket, place fitting clamp in the vice
and cut blade to length. Fit shoulder screws to
prevent damage to components
2
5
Fit socket to fitting clamp top housing and
tighten pyramid screws (15Nm). Refer to
alignment page for initial set up.
4
5
15Nm
Stand user, carry out dynamic alignment and
walking trials. Adjust height to achieve definitive
length with weight evenly
distributed.
6
Drill two 8.1 diameter holes through drill bushes.
6
4
15Nm
938295/8-1214
Tabla de contenido
loading

Este manual también es adecuado para:

Elite blade eb30r9Elite blade eb24l1dElite blade eb30r9d

Tabla de contenido