HEINRICH'S HEK 8695 Instrucciones De Servicio página 14

Placa calefactora infraroja
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
Assembly Instructions
NOTE:
The handle trim must be placed so that it is flush / level with the top of the
handle.
Before first use the appliance must be assembled.
Place trim piece in the handle.
Locate handle guide pins in guide holes on the side of the appliance.
Insert screws into the 4 screw holes and tighten to hand tight.
Do not overtighten as this may cause damage to the appliance.
Repeat for the other side.
WARNING: Risk of burns!
The appliance can get very hot. Avoid touching the hotplate when in use and
for some time after use.
CAUTION:
Before inserting the plug into the socket – Make sure that the mains voltage to
be used matches the voltage of the appliance. You can find this information on
the nameplate on the underside of the appliance.
Place appliance on a flat, level, sturdy surface.
Insert plug into mains outlet / wall socket.
Turn power knob clockwise to desired level (between "MIN" and "MAX").
The Power Indicator Light will illuminate.
Put pan(s) / pot(s) on the hotplate(s).
When finished turn power knob anti-clockwise to "MIN" and remove plug
from socket. The power light will turn off.
Caution - the hotplate will remain hot for some time after switching off.
Allow appliance to cool down before moving, cleaning or putting away.
14
loading

Productos relacionados para HEINRICH'S HEK 8695