Idiomas disponibles
Idiomas disponibles
Initial setup and manual reset
• Make sure the device is powered on. If you haven't done so, turn on the doorbell by holding the
power button for 3 seconds, located on the back of the unit.
• If the red LED indicator does not start blinking or if no audible noti cation is heard, press the reset
button of the doorbell for 2 seconds or until you hear a tone indicating that a reset has occurred.
• Once the button is released, the red LED on the front will start blinking.
• Follow the app's instructions to complete the network con guration process.
• The LED changes to solid blue when the device is successfully connected to your Wi-Fi network.
Add device
9:41 AM
16
Select the + icon to add the device, followed by the smart doorbell.
Step 1
9:41 AM
60 %
60 %
Step 2
9:41 AM
60 %
When the LED starts blinking, tap on
next step followed by the Next button
to continue.
Step 3
9:41 AM
60 %
You must connect to a 2.4GHz Wi-Fi
network. Enter your network password.
Make sure the correct code is entered,
otherwise the device will not be able
to connect.
17
