INSTRUCTIONS FOR USE
Body oscillating switch
High speed of air flow
Warm ps:
Do not rotate the mer counter-clockwise to "ON" from "120min".
MAINTENANCE INSTRUCTION
The fan requires li le maintenance. Do not try to fix it by yourself. Refer
it to qualified service personnel if service is needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circula on to the motor, keep vents at the rear
of the motor free of dust. Do not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a so
detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the
surface. Do not use any of the following as a cleaner: gasoline, thinner,
bending.
5. Do not allow water or any other liquid into the motor housing or
interior parts.
03
Timer (You can press the key to time the
fan to shut down after 1-120 min )
Low speed of air flow
Middle speed of air flow
cloth soaking a mild
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plas c parts should be cleaned with a so cloth moisten with mild
soap.
Thoroughly remove soap film with dry cloth.
DISPOSAL:
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collec on facili es. Contact you
local government for informa on regarding the collec on systems
available. If electrical appliances are disposed of in landfills or
dumps, hazardous substances can leak into the groundwater and get
into the foodchain, damaging your health and well-being.
Description
Maximum fan flow rate
Fan power input
Service value
Standby power consumption
Off power consumption
Fan sound power level
Maximum air velocity
Seasonal electricity consumption
Measurement standard for service value
WARRANTY: 2 YEARS
Symbol
value
unit
F
26.71
m ³ /min
P
34.2
W
S
0.78
(m ³ /min)/W
V
P
0
W
SB
P
-
W
OFF
L
69.9
dB(A
)
WA
C
3.49
meters/esc
Q
10.944
kWh/a
GB/T 13380-2007
04