dibea UV-10 Manual De Instrucciones página 6

Cleaning and Maintenance Cleaning and Maintenance Cleaning and Maintenance
Daily storage
If the vacuum cleaner is not used for a long time, put it in a dry and safe place. Do not
put it in the wet environment or under strong sunlight.
Cleaning the machine
Make sure the vacuum cleaner is off. Clean the machine with half-wet cotton cloth.
Avoid water or cleanser entering the machine.
Note: After cleaning, use a dry cloth to clean the transparent film on the bottom of
the machine.
Cleaning the dust bin Cleaning the dust bin Cleaning the dust bin
First the Hepa filter is encased by paper towel, gently pat small dust out (as figure 1)
Press filter lock button and take out filter assy, cleaning dust tank (as figure 2).
Put dust tank back to main body and close the cover.
Note: The dust tank needs to be dried after cleaning before reinstallment.
Make sure the dust tank and filter completely dry when put them back to main body.
1
Note:It should be cleaning dust tank when dust reaches the maximum value of the
indicator scale
Note: Do not remove filter on the air outlet for cleaning.
2
Cleaning host outlet Cleaning host outlet Cleaning host outlet
Check air outlet and air inlet before assemble
dust tank, remove obstacle for good use effect.
Item
Power
Voltage
Dust Tank
Vacuum Power
UV wavelength
Weight
Size
Cleaning and Maintenance
inlet
outlet
Product Specificatzions
Specifications
300W
230V/50Hz
0.4L
10Kpa
253.7
1.65Kg
310*260*220mm