Idiomas disponibles
Idiomas disponibles
4. PRE-INSTALLATION REQUIREMENTS
4.1 Water Quality Parameters
For the ArrowMAX
through the water it is treating. Incoming water should meet the following quality
levels:
• UV Transmittance (UVT) >95%/cm
A pre-installation water quality test is required to determine the water
contaminants. The type and number of stages for the pre-filtration system shall be
selected accordingly, to maintain the above conditions at all times.
4.2 Location Conditions
It is recommended to install the unit indoors and out of direct sunlight. If this is not
possible and the system is outdoors or in a sunny area, the unit must be protected
from direct sunlight, rain, and freezing temperatures.
• The installation area must be away from locations where water splashes and/
or flooding are possible.
• The approximate area that must be available to install the unit is 1m × 1m.
• Relative Humidity (RH) <95%
8
HOME to work effectively, UV radiation must be able to pass
TM
