Idiomas disponibles
Idiomas disponibles
6. Mounting the mounting plate:
1. Align the mounting holes in the mounting plate with the holes in the
crossbar.
2. Attach the mounting plate in the centre of the crossbar with 2 screws using
a Phillips screwdriver. The mounting plate can be attached to both the right
and left side.
Please note: The arrow on the mounting plate shows the direction of
movement of the control box.
7. Control box assembly:
1. Turn the desk frame over so that the crossbar is facing up. It is
recommended that at least two people participate in the turning the desk
frame over.
