Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
Read all safety and operating instructions before to starting the device by first time. Keep the user manual for future reference
beside the unit. Follow all instructions and warnings inside the user manual and the own device.
In order to avoid the risk of electric shock or fire, do not expose the unit to rain or moisture, usint it in dry environment. Also, avoid
spill liquids inside the unit.
The device must be placed apart from hot sources like radiators, temperature registers, heating conductions or anything heat source.
To avoid damages in the unit, be carefully during the transport, using the original package and avoiding to place heavy objects over
it. During the installation, avoid to hit or scratch it. Also, avoid to subject the device to great vibrations environment.
If liquids have been spilled, metallic objects have entered inside the unit or the device generates smoke or strange smell and looks
like malfunction, switch off it immediately and contact with your distributor.
Before to connect it, check the voltage selector. It must be set to the proper input voltage.
WPL A Series is a powered two-way loudspeaker (included WPL BASS A as powered subwoofer) range designed to offer a professional
reinforcement system for a variety applications.
Their wide response range and dimensions, have very adequate for halls, pubs, clubs or stages.
This WPL A loudspeaker range is manufactured in ABS polypropylene plastic in large injection mold and
includes 4 references according to speakers and power requirements.
Their built-in power amplifier (2 separated amplifiers for WPL in A, WPL 1 A & WPL 5A) have protection circuits, tone controls and input
signal source selection.
The WPL BASS A built-in amplifier incorporates an output phase inversor switch in order to obtain a perfect response depending on the
installation features.
Their ergonomic and strong handles allow to manage and transport them very confortably.
WPL A Series incorporates a rigging system. It consists of 3 points in the upper side and other 3 points in the downside of the unit.
Before rigging it, please, consult with a professional in order to indicate the best way and rigging system.
All units incorporate 2 plastic pieces in order to fit them in monitor position, taking advantage of their shape.
35 mm. insertion piece in the bottom side for using loudspeaker stands. (Upside on WPL BASS A).
The high frequency driver is protected by special design circuit to avoid being damaged when overload (Only WPL In A, WPL1 A
& WPL 5 A).
The metallic grille protects the woofer against hits.
Stackable system.
x2 Plastic pieces
for monitoring
position.
Detailed Safety Instructions
Description and Common Features
Rigging points. Remove the screws and fit an
adequeate fixation ring
35 mm
insertion
Tabla de contenido
