Receiver Volume Control - Work Pro W WRD 280 AF Instrucciones De Usuario

EN
UHF Diversity Wireless system/Sistema inalámbrico UHF Diversity
System Setup Receiver Programming:
Group and Channel Selection
Press ▲ or ▼ to choose the appreciate frequency group, as shown
on the left.
For best results when operating multiple systems, set every channel
interval maximum.

Receiver Volume Control

Left turn for output level decrease, right turn for output level increase.
Quiet and audio level adjustment
The quiet volume control is default，it is no need to set again. Turn
it up clockwise if there is interfere signals until the RF indicator
light turn off.
Automatic Transmitter Setup
Turn off the receiver and open the battery canister, turn the IR port
"AFS"
on the receiver IR port, press button, and then turn on
the receiver again.
Turn the Badypack receiver IR port on the receiver IR port, then
press "AFS" button, and then press the button on the
"AFS"
bodypack transmitter.
The receiver keeps transmitting sync frequencies 25 seconds for
each time you press the "AFS" button.
Each time turn on the transmitter and press the "AFS" button within
the bodypack transmitter, the transmitter will stars the IR receive
system within 25 seconds.
The handheld transmitter lights up when the IR receiver system stars,
the whole display within the backpack transmitter flashes (the IR
ndicator light also flashes at the same time)
Pay attention:
The interval of the receiver and the transmitter
should be less than 0.5m as the IR connection is setting; only can
turn one transmitter IR port on the receiver at each IR connection
when multi-system is using.
WRD 280 AF User Manual /Manual de Usuario Pag 6