Idiomas disponibles
Idiomas disponibles
WaveLinx Pro
General Information
Overview
The Wireless Universal Voltage Dimming Switchpack control is an integral part of the WaveLinx Pro Connected Lighting (WCL) system
and offers 120-347VAC relay control and continuous 0-10V dimming control of LED and non LED loads. The Wireless Universal Voltage
Dimming Switchpack also supports 20 amp plug load control (20 amp model only). The switchpack is powered by the 120- 347VAC
circuit it is controlling and provides simple junction box mounting through 1/2" knockout. The wireless relay switchpack with 0-10V
control operates on a wireless mesh network based on IEEE 802.15.4 standards.
The intended use of the Wireless Universal Voltage Dimming Switchpack is for commercial lighting and control integration.
Listed below are a few operating notes related to the switch pack.
• The basic WaveLinx Pro system uses some number of Wireless Universal Voltage Dimming Switchpack. Each is powered by AC
line voltage 120-347VAC (+/- 10%) input power supply with Line, and neutral terminals.
• The Wireless Universal Voltage Dimming Switchpack also includes a 0-10V output to allow the entire system to be controlled by a
single 0-10V control device.
• The Wireless Universal Voltage Dimming Switchpack will support up to 120mA current sink at the 0-10V output and it can switch
up to 20 amps plug loads (20 amp model only).
• Note: Specifications and dimensions subject to change without notice.
Plenum Rating
Most of the components in this system are intended to be mounted above the ceiling tiles, in an area that could be intended for air
handling. For this reason, all of the Wireless Universal Voltage Dimming Switchpack cabling is plenum rated.
N
ote:
The components do not meet the plenum rating standards for Chicago without additional measures.
Model
Relay
WSP-UV-010
20 amps
WSP-UV-08A
8 amps
IB503102ML page 2
February 2022
Plug Load Control
Y
N
Wireless Universal Voltage Dimming Switchpack
www.cooperlighting.com
