Technical Specification - Mark MOVILED BEAM 712 Instrucciones De Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

like after transportation because it might damage the light due to the
environment changes. So make sure to operate the fixture until it is in
normal temperature.
This light should be keep away from strong shaking during any
transportation or movement.
Don ' t pull up the light by only the head, or it might cause damages to the
mechanical parts.
Don ' t expose the fixture in overheat, moisture or environment with too
much du st when installing it. And don' t lay any power cables on the floor.
Or it might cause electronic shock to the people.
Make sure the installation place is in good safety condition before installing
the fixture.
Make sure to put the safety chain and check whether the screws are
screwed properly when installing the fixture.
Make sure the lens are in good condition. It' s recommended to replace the
units if there are any
Make sure the fixture is operated by qualified personnel who knows the
fixture before using.
Keep the original packages if any second shipment is needed.
Don ' t try to change the fixtures without any instruction by the
manufacture r or the appointed repairing agencies.
It is not in warranty range if there are any malfunctions fron not following
the user manual to operate or any illegal operation, like shock short
circuit ,electronic shock, lamp broke, etc.
5.Installation via clamp
Screw one clamp each via a M8 screw and nut onto the holders.
Insert the quick -lock fasteners of the first holder into the respective holes
on the bottom of the device. Tighten the quick-lock fasteners fully
clockwise. install the second holder.
Pull the safety -rope through the holes on the bottom of the base and over
the trussing system or a safe fixation spot. insert the end in the carabine
and tighten the safety scres.

6.Technical specification

Extremely small, fast and powerful led moving beam.
DMX channels:6/12/37
270 °
Tilt:
Smooth electronic dimming:0 - 100
Electronic strobe with pulse and random effects
MOVILED BEAM 712
damages or severe scratch.
,speed adjustable
User Manual/Manual de uso
Pag 3
EN
Tabla de contenido
loading

Tabla de contenido