Idiomas disponibles
Idiomas disponibles
MANTEL/TOP
G
N
COMPLETED
ASSEMBLY
N
M
L
M
L
Completed
Unit
9.
Insert one Wood Dowel(N) into each of
the pre-drilled holes on the top edges of
the Assembly from step 8.Then locate
Mantel/Top (G) and lay finished side up
on top of completed assembly. From the
inside, attach the Mantel using Bolt (L)
and Washer (M) through the pre-drilled
holes in the mounting blocks.
HAND TIGHTEN ONLY.
N
10. Using Phillips head screwdriver
tighten all Bolts alternating top and
bottom, left and right.
11. Remove the two mounting brackets
attached to the back of the Left and
Right Front panels. Set aside with the
wood screws.
Please read All "Electric Fireplace
Insert" instructions prior to installing
Electric Insert in your completed
Fireplace Mantel. Install the insert in
your Fireplace close to its final
position. Move your completed unit
only short distances. Move completed
Unit with great care. It takes two
people to move completed unit into
its position.
12. Lift insert carefully into the back
of the unit and center in the insert
opening. Do not drag insert across
Base/Hearth as it may scratch your
unit.
13. Install the mounting brackets to
hold insert flush against the inside of
the mantel.
Twin-Star International, Inc.
Delray Beach, FL 33483
In English: 1-866-661-1218
In French: 1-866-374-9203
In Spanish: 1-866-661-1218
Model# 28WM431
Made in China
Printed in China
© 2008, Twin-Star International, Inc.
