Idiomas disponibles
Idiomas disponibles
In the "Cool", "Heat" or "Fan" mode, press
speed (see Figure 6.5).
If the wired controller is configured with seven fan speeds, press
the fan speed in turn as shown in Figure 6.6.
Auto
If the wired controller is configured with three fan speeds, press
the fan speed in turn as shown in Figure 6.7.
Note:
• In the "Auto" and "Dry" modes, the fan speed is set to "Auto", and will not change even
press
(Fan speed) button.
• The default fan speed is 7 fan speeds, please refer to "Field Setting" to adjust the default
fan speed.
4-4 Swing Setting
→
→
→
Speed 1
Speed 2 Speed 3
→
Auto
Low
(Fan speed) button to set the operating fan
→
→
Speed 4
Speed 5
Figure 6.6
→
→
Mid
High
Figure 6.7
Figure 6.8
16
(Fan speed) button to set
→
→
Speed 7
Speed 6
(Fan speed) button to set
V.2
