Idiomas disponibles
Idiomas disponibles
Wi-Fi Hotspot Indicator
Light off
Orange light on
Blue light on
Orange light blink
Usage
Connect Power Supply
1
Plug the power jack into the power socket at the back of the printer.
Power On
2
• Press the power button to power the printer on.
• Power indicator lights on in white, Wi-Fi hotspot indicator starts
blinking in orange in about 10s, then lights on in orange.
• The printer enters the idle status.
Connect Device Wi-Fi
3
•
Open the WLAN connection on your smartphone, tablet,
computer, etc. and select "Liene Photo Printer [xxxx]".
•
The default connection password is 12345678.
•
When the Wi-Fi hotspot indicator lights on in blue, it means
successful connection for at least 1 device.
Note:
• You can change the password in the APP.
• Support to connect to a maximum of 5 devices simultaneously.
• [xxxx] refers to the last four digits of the product SN number, which can be
found on the label at the bottom of the printer.
• For Android device, after switching the Wi-Fi signal to the printer Wi-Fi hotspot
signal, it will pop up a message that the internet may not be available.
• Please keep the WLAN connection when using the printer.
• Please download and install the computer driver before connecting to
a computer.
Function off
Function on
Connected to one or more devices
Function turning on
08
