Idiomas disponibles
Idiomas disponibles
TROUBLEHOOTING
Problems
Appliance not works
Appliance cannot charge
Appliance cannot charge
Appliance always backwards
Appliance can't be backwards
Appliance works abnormal
Left/right brushes are abnormal
Dust tank is abnormal
Universal wheel error
other abnormal
Procedure to observe for battery's end of life
The appliance batteries must be removed before discarding the equipment. Please follow the procedure
below. Ensure that your appliance is disconnected so as to reduce any risk of electrical shock. Discharge
the batteries fully. Remove the protection cover situated in a location where you connect the mains
voltage adapter and it is removed so as to access the batteries compartment. Carry a screwdriver to
remove the screw. Remove the batteries from the equipment. Cut the cables and tab connecting the
batteries in the printed circuit and remove them.
ATTENTION: THESE LI-ION CELLS MUST BE RECYCLED OR ELIMINATED IN ACCORDANCE WITH THE EQUIPMENT
SCRAPPING.
Do not burn, dismantle, crush or break out the batteries because they can release toxic substances.
Do not expose them to extreme temperatures. Drop them in the batteries recycling bins designed for this
purpose or return them to your retailer.
Correct disposal of the unit (Electrical and Electronic Equipment).
(Applicable in the European Union and the rest of Europe that have adopted separate
collection systems countries). The European Directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE), requires that old household electrical appliances must not
be disposed of in the normal household waste stream. Old appliances must be collected
separately in order to optimize the recovery and recycling of the materials they contain
and reduce the impact on human health and the environment. The symbol of the crossed
out dustbin is marked on all products to remind the obligations of separate collection. Consumers
should contact their local authority or retailer for information concerning the correct disposal of their
product.
----------------------------------------------------------------------------------------------
Reasons
You forgot to turn on
Appliance run out of battery
Charging
connection
unreliable
Charging contact fail
Cliff sensors are dirty
Front bumper problem
The wheel is stuck by something
Left/right brush assembly error or
stuck by something
assembly error
stuck by something
Unknown reasons
www.livoo.fr
Solution
Turn on power swtich
Charge with adapter
Make sure adapter is reliable
are
Wipe charger and charging contact
Ensure adaptor contact is ok
Dry clean the sensors
Slight hit the bumper
Clean it
Install the brush properly or clean it
Install the tank properly
Take out the wheel and clean it
Restart the machine
(turn off power switch
then turn on again)
