Grunkel ASM-12KPA MAX Manual De Instrucciones página 16

Filter system cleaning
Place the appliance in vertical position as shown in the figure, then press the open lid
button.
Unmount the dust cup from the appliance and then remove the filter system. Remove
the dust accumulated in the dust cup completely.
Remove the filter system by pressing on the side tabs, as shown in the figure.
To clean these parts, rinse thoroughly with a generous amount of water. Allow them to
soak to remove all the accumulated dust. Keep these parts drying for 24 hours.
Install the filter system as shown in the figure.
Instal the filter system in the dust cup, then insert the dust cup in the appliance as
shown in the figure. Please pay attentiont to the slot position.
1
Open lid button
3
Press carefully with your
fingers on both sides
5
Install the filter in this direction
6
Pay attention to the
slot position
2
4
7
16
Press this button to
remove the dust cup
Rinse with abundant water
Insert the tab in the indicated
slot