Idiomas disponibles
Idiomas disponibles
07643
REF.
MOUNTING
Before using for the first time:
1. Remove the packaging materials from the appliance.
2. Clean the grill and its accessories.
3. Hold the 4 pieces of plastic foot on the back of the body. See image number 2 below.
4. Fill the body with water up to the '1.0L' mark.
5. Insert the straight metal tube through the 2 holes in the zinc plate and body on both
sides.
6. Put the two rubber bushings on the left and right sides of the straight metal tube to
avoid overheating. See image nº 5 below.
7. Attach the grill rack to the top.
8. Let the grill warm for a moment without any food on the grill. This will reduce odor
when lighting a new grill. (A slight odor and a little smoke may be emitted. Ensure
adequate ventilation.)
MOUNT THE BRACKET
1. Attach the short tube (A1) to the long tube (A2) as shown in the image above. Repeat for
all other legs.
2. Use the M4 screw (A6) to fix the short side walls (A3) and also the long side walls (A4)
together with the leg tubes already fixed in the previous step. Then use the wing nut (A5)
to fix securely and reliably.
3. Finish the entire assembly with the other 3 sides of the bracket, as in processes 1 and 2,
4. Attach the rubber stopper to the support on each leg as in the image (A7). Then place
the small grill on top, holding and supporting it on all the side walls of the support you
just assembled (figure A8).
5. Attach the finished barbecue according to the previous instructions in the "ASSEMBLY"
section at the top of the legs, according to the last figure below.
6. Let the grill warm for a moment without any food on the grill. This will reduce odor
when lighting a new grill. (A slight odor and some smoke may be emitted. Ensure
adequate ventilation.)
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
1. Body
2. Metal hook
3. plastic foot
4. Tray / water tank
5. Nut
6. straight metal tube
7. rubber jacks
8. heating element
9. grill
