Idiomas disponibles
Idiomas disponibles
- Operation for working
Only use tool bits which can be securely fastened in the chuck and for which the bits has been designed.
Before using the machine check whether the screw-bit is inserted correctly. Avoid over-tightening screws,
otherwise the screw head may be damaged or stripping of the threads may occur.
LED Working spot light
Pushing the top switch (6) will turn on the LED working spot light (5).
Screw Insertion
Set the direction of rotation of the screwdriver to the clockwise direction. Insert the screw-bit into the slot in the
head of the screw. Hold the screw bit perpendicular to the head of the screw, otherwise the screw or the screw
head may be damaged. Press the screw bit against the screw with a constant pressure while driving in the
screw.
When the screw is completely screwed in, hold the machine firmly and release the On/Off trigger, otherwise the
screw or the screw head may be damaged. If the On/Off trigger is not released immediately a high torque could
also damage the screw-bit or the screwdriver.
Screw Removal
Set the direction of rotation of the screwdriver to the anticlockwise direction. Insert the screw-bit into the slot in
the head of the screw. Hold the screw-bit perpendicular to the head of the screw, otherwise the screw or the
screw head may be damaged. Press the screw bit against the screw with a constant pressure while removing
the screw.
10.
Maintenance and Cleaning
Attention! Always switch off the screwdriver and lock the switch in the OFF position before carrying
out any work on the machine.
To clean, always use a dry or moist, but not wet, towel. Many cleaning agents contain chemical substances
which may cause damage to the plastic parts of the machine. Therefore do not use any strong or inflammable
cleaners such as petrol, paint thinner, turpentine or similar cleaning agents.
Always keep air ventilation holes free of dust deposits to prevent overheating.
11.
Servicing
For more information, please contact us.
12.
Disposal
Power tools, accessories and packaging should be sorted for environmentally-friendly recycling.
Battery:
The battery cell is built into the device, and the device must be disposed of therefore only by a specialist.
Ni-MH
EN
10
