Enlaces rápidos

Manual
Inverter
Welder
Applies for:
Code
Model
29961
SOIN-101MP
CAUTION
Read this manual thoroughly
before using the tool.
60%
Work Cycle
loading

Resumen de contenidos para PRETUL SOIN-101MP

  • Página 1 Manual Inverter Welder Work Cycle Applies for: Code Model 29961 SOIN-101MP Read this manual thoroughly CAUTION before using the tool.
  • Página 2 Contents CAUTION Technical specifications Power Requirements To gain the best performance of the tool, prolong the duty life, General Power Tools Safety Warnings make the Warranty valid if necessary, and to avoid hazards Safety Warnings for Inverter Welders of fatal injuries please read and understand this Manual before Parts using the tool.
  • Página 3 Technical specifications SOIN-101MP Code 29961 Description Inverter Welder Input Voltage 127 V~ / 50 Hz - 60 Hz Rated Input Capacity 3.5 kVA Open Circuit Voltage 69 V c.c. Power Factor Cos 0.73 Current Range 20 A - 100 A Rated Duty Cycle 6 minutes’...
  • Página 4 General Power Tools Safety Warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
  • Página 5 Safety Warnings for Inverter Welders Protection Equipment for Welding Prevent Injuries and Accidents WARNING WARNING • Wear a welding mask to protect eyes • Risks of electric shock: and face when soldering. Assure the mask protective glass An electric shock coming from the soldering electrode may shade is adequate for the soldering process to carry out.
  • Página 6 Parts Power Adjustment Control Positive Connection ( + ) Strap Work Piece Slots Grounding Clamp Negative Connection ( - ) Switch Electrode Holder Power Cord Ventilation Slots Ventilation Inlet Carrying Strap Protective Mask To get better results use a Brand Hammer-Brush cable set with soldering clamp CAB-200 for Slag Removal...
  • Página 7 Installation (SMAW) Connections CAUTION To prevent electric shock please consult information in the “Electrical Requirements” section in Inverse Polarity pages 3 and 5. • The fast connections in the electrode holder and the grounding clamp are inserted and turned one quarter of a turn in a clockwise direction in the outlets found iin the front panel to be secured.
  • Página 8 Start Up Preparation • Only experience, practice and care can guarantee a good welding job. • The factor intervening in the welding process are many: required current, distance between the electrode and the 45° 45° work piece, soldering speed and direction, thickness and type of the material, the work piece position, electrode angle and also gauge, type of material and electrode covering.
  • Página 9 Start Up Examples of welding Correctly Applied Welding Electrode movement too fast and / or very low current. Electrode movement too slow and / or very high current. Electrode too separated from the work piece. Spiral movement. Half-Moon movement. Bevel Zigzag Movement.
  • Página 10 Maintenance • The correct use and regular cleansing extend the useful life of the welder. CAUTION • Only qualified personnel shall carry out repairs. We recommend visiting a Authorized Service Center to repair your welder, get supplies or accessories. Regular Maintenance Storage •...
  • Página 11 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center.
  • Página 12 Model Brand 29961 SOIN-101MP Warranty. Duration: 1 year. Coverage: parts, components and workmanship against manufacturing or operating defects, except if used under conditions other than normal; when it was not operated in accordance with the instructive; was altered or repaired by personnel not authorized by Truper .

Este manual también es adecuado para:

29961