WerkaPro 10868 Instrucciones De Instalación página 6

Step 1:
Take six bars, twelve screws, twelve
washers and assemble the parts as shown
below.
Step 3:
After installing the shelves, loosen the two
front footrests to set them slightly higher
than the rear footrests. The assembly should
be stable.
Step 2:
Take four foot screws, four washers and
assemble as shown below.
Step 4:
Take two end caps, two reinforcement bars
and four washers and assemble as shown
below. Note that the bottom reinforcement
bar must go behind the toilet.