Mark MBS COMBO 500 Manual De Uso página 4

EN
2. MP3 Player: It allows to load
3. Stereo IN 5/6: 2x RCA connectors. Unbalanced input. It allows to connect a Line Level device
4. Monitor Outputs
5. Volume : It allows to control the volume of 5/6 & 7/8 stereo inputs.
6. Stereo IN 7/8: It allows to connect a LINE level device
7. Phantom Power: Phantom Power Light.
8. Phantom Power: Phantom Power Switch.
9. Monitor Outputs Volume: It allows to control the volume of Monitor Outputs.
10. Headphone Output
11. Limit: According to the signal strenght, indicator light Flasing
12. Eff Master: It allows to control the level of echo and time of internal reverberation added
back to the mix.
13. USB/IPOD: It allows to control the volume of USB/IPOD.
14. Volume Master: It allows to control the overall level of entire amplifier.
15. Power Light
16. Peak Led: It lights up when the applied signal reaches to distortion. Reduce the input level
in order to eliminate the distortion. For channel 1, 2, 3 & 4.
17. Mic Input: XLR 3 pin connector. It allows to connect a dynamic microphone (CH1). The
same for CH2, CH3 & CH4.
18. Line Input: Jack connector for Line Input
19. Treble: These knob setup the tone level for high frequencies.
20 Bass: These knob setup the tone level for low frequencies.
21.Effect: It allows to control the channel volume reverberation effect. The same for CH2, CH3
& CH4.
22.Volume: It allows to control the channel volume. The same for CH2, CH3 & CH4.
23.Speakers OUT: It allows to connect the speakers trough Jack connector.
Pag. 3
external file in MP3 format through USB port or SD card slot.
MBS COMBO 500