Idiomas disponibles
Idiomas disponibles
17
Wall Bracket Illustrated
Log-set / Crystal / Pebble Ember Installation
A. Glass front must be removed and the appliance must be mounted in its final location before the log-set / crystal
/ pebble embers are installed.
B. If your fireplace come with log-set, remove the log-set from the package, put it to the fireplace designed place.
Figure 1.
C. If your fireplace come with CLEAN CRYSTAL or PEBBLE MEDIA: Crystal or pebbles media may have a fine oil
residue that needs to be cleaned prior to installation. Clean the them with mild dish soap, drain, rinse thoroughly
and dry before placing into the tray.
D. Place the plastic tray (I) to the fireplace designed place. Then carefully place crystal or pebbles embers into the
bottom tray on the front of the appliance as illustrated. Apply an even layer rom side to side. Figure 2, Figure 3.
Figure 1.
Figure 2
Figure 3. (Pebbles media)
Figure 3. (Crystal media)
