Toto TS101S Manual De Instrucciones página 4

INSTALLATION PROCEDURE -TS101V
2) Handshower bracket:
Attach the handshower
bracket to the wall in the
desired location using the
included hardware and wall
anchors (if necessary).
NOTE: For hollow wall installation, drill 1/4" holes for insertion of
anchors. For installation directly to a stud, drill 3/32" pilot holes.
Anchors should not be used if attaching to a wall stud.
INSTALLATION PROCEDURE -TS101S
3) Shower arm mount:
Connect the shower arm mount to a pre-
installed shower arm. Ensure the gasket/
sieve is present. Connect the hex nut end
of the hose to the bottom opening of the
Gasket
showerarm mount.
Attach conical nut end of hose to the
handshower ensuing the gasket/sieve
are present and place the hand shower in
Handshower
the bracket.
INSTALLATION PROCEDURE - TS101W60
4) Handshower hose:
NOTE: Only one (1) gasket
per location shown, do not
add if gasket already present.
Handshower Bracket
Hose
Gasket
Conical nut
Handshower
Hose
Shower Arm
Option 1
Hex nut
4
Bracket Base
Gasket
Shower Arm
Mount
Water outlet examples
Option 2
Gasket
Hex nut
OR
Gasket