Idiomas disponibles
Idiomas disponibles
User Information
The Cat's Eye is intended to maintain equal pressure
between dual tires and should not be used for any
other purpose.
OPERATING TIPS
The torque limit on the Cat's Eye mounting bolt is
15 FT-LBS. Damage or leaks can occur if mounting
bolt is overtightened.
Bubble test to insure correct installation.
Valve stems must be in good condition to operate
the Cat's Eye.
Always insure that hoses are installed with
minimal bending or "kinking".
Do not use acid wheel wash. This will void the
Cat's Eye warranty.
When installing new or used tires, the inside of
the tire must be clean and free of all materials,
including wheel balancing compounds.
The Cat's Eye is not recommended for steer axles.
60004201
LINK MFG. 5/5/22
REPLACEMENT PARTS
ITEM
Universal Wheel Bracket.......................................... 60003009
Universal Hub Bracket ..............................................60003010
Hose Protector-6'' length ..........................................60004312
16'' Rubber Hose with Straight Hose End ..................... 60005032
16'' Rubber Hose with 180° Hose End .......................... 60005832
16'' Stainless Steel Hose with Straight Hose End............ 60005082
16'' Stainless Steel Hose with 180° Hose End ................ 60005882
14'' Rubber Hose with Straight Hose End ..................... 60005028
14'' Rubber Hose with 180° Hose End .......................... 60005828
14'' Stainless Steel Hose with Straight Hose End ............ 60005078
14'' Stainless Steel Hose with 180° Hose End ................. 60005878
12'' Rubber Hose with Straight Hose End...................... 60005024
12'' Rubber Hose with 180° Hose End .......................... 60005824
12'' Stainless Steel Hose with Straight Hose End .............60005074
12'' Stainless Steel Hose with 180° Hose End ..................60005874
Deluxe Valve Stem Repair Tool .................................. 60009060
Air Inlet Fitting .......................................................60002019
Replacement Seal Pack (24 seals) ............................. 60004222
WARRANTY
Please visit our website at www.linkmfg.com/warranty
for warranty details and to register your product.
Contact Link Manufacturing at 800.222.6283
to request a printed copy.
Link
Manufacturing, Ltd.
1-800-222-6283
®
223 15th St. NE
712-722-4874
Sioux Center, IA 51250
www.linkmfg.com
TROUBLESHOOTING GUIDE
PART #
PROBLEM
INSPECT
Air Leaks.
Bubble test.
"Eye" does not
Check pressure
close when tires
with gauge.
are at correct
pressure.
"Eye" does not
Depress the valve
open when
core at the central
tires have lost
airing point and
pressure.
check for "eye"
movement or
remove the hose
end fitting from
the outside tire.
CORRECTIVE ACTION
1) Bubble test to locate the leak.
2) If the leak is located at one of the
hose end fittings:
a) First remove the fitting and
inspect the tire stem for damage
or debris. Repair or replace as
necessary.
b) Inspect the seal material (inside
the fitting) for damage. Replace
seal or hose if necessary.
3) If the leak is located at the base
of the gauge remove the hose or
air inlet valve and apply thread
sealant liberally to the threads
and replace.
4) If the leak is located at one of the
hose crimps return the hose to
Link for repair or replacement.
5) If the leak is located at the
Cat's Eye central airing point,
replace the valve core or order a
replacement air inlet valve.
1) Check to see that the Cat's Eye
gauge is the correct pressure
rating for your application.
2) Remove the fitting from the tire
stems and check the air pressure
in each tire.
3) Inspect both tire stems by
depressing the valve core to ensure
that there is no air blockage.
4) Inspect tire stem threads for
imperfections. Repair the threads
with thread repair tool.
1) Check to see that the Cat's Eye
gauge is the correct pressure
rating for your application.
2) If the "eye" does not open when
one of the hose ends has been
removed from the tire stem, call
Link to determine the method of
repair or replacement.
